Install hostapd
Find or create bridge in your system. Usually your system already having bridge.
Edit configuration:
Find or create bridge in your system. Usually your system already having bridge.
Edit configuration:
vi /etc/hostapd/hostapd.conf
ctrl_interface=/var/run/hostapd ctrl_interface_group=wheel # Some usable default settings... macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=1 # Uncomment these for base WPA & WPA2 support with a pre-shared key wpa=2 wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP #rsn_pairwise=CCMP # DO NOT FORGET TO SET A WPA PASSPHRASE!! wpa_passphrase=__PASSWORD__ # Most modern wireless drivers in the kernel need driver=nl80211 driver=nl80211 # Customize these for your local configuration... interface=wlp2s0 hw_mode=g channel=8 ssid=__SSID__ # define internet connection
bridge=virbr0
hostapd may not work, if the device is managed by NetworkManager. You can mask the device:
/etc/NetworkManager/NetworkManager.conf
[keyfile] unmanaged-devices=mac:<lthwaddr>
Start service hostapd
Комментариев нет:
Отправить комментарий